KLENCO Indonesia PREMIUM SHIELD Water Based Floor Sealer

Product Description

PREMIUM SHIELD is a heavy-duty acrylic polymer emulsion floor sealer. It forms a tough and transparent film to seal pores and restore, worn and faded floors.

Areas of Use

PREMIUM SHIELD is ideal for use on marble, terrazzo, vinyl, linoleum and ceramic tiles as an undercoating for floor finishes.

Special Features

• Excellent leveling and fast drying
• Clear, non-yellowing, impervious film
• Provides a highly bondable surface for subsequent application of floor polish
• Excellent water, detergent and soil resistance
• Non-slip when dry for greater safety

Directions for Use

Depending on the porosity of the flooring:

Coverage: 1st coat - 15 to 20 m2/lit * Subsequent coats - 20 m2/lit or higher

• Old floor sealer and finish should first be removed using a good stripper such as ACTION 150 S. Unpolished floors must be thoroughly cleaned first with a floor detergent such as POWER PLUS.
• Mop or rinse the floors thoroughly with clean water, allow to dry completely.
• Apply an even coat of PREMIUM SHIELD with a clean cotton mop. Allow 15 - 30 minutes for drying and then apply a second coat and again allow to dry.
• To provide a high shine, apply one or more coats of floor finish such as 20 PLUS.

Precautions

As with most chemical products, avoid ingestion and eye contact. If ingested, dilute by drinking water and seek medical help. If product enters eyes, flushing with water should be sufficient. However, seek medical help if discomfort persists.