KLENCO Indonesia - ACTION 100 S "Scale & Rust Remover"
A
powerful acidic cleaner, ACTION 100 S effectively removes
scale and rust stains from mosaic and concrete surface. Despite its strong acid
cleaning properties, when used properly, special corrosion inhibitors makes ACTION
100 S safe to clean metals, such as on urinal gutters.
Area of Use
ACTION 100 S should be used on mosaic, cement, concrete
and many metal surface for the one time removal of rust stains and scale.
Special Features
· Optimum blend of
acids and surfactants for maximum cleaning power
· High viscosity for
“clinging” effect allows for effective cleaning of vertical surfaces
· Corrosion inhibiting
properties makes it safe on most metal, except aluminium and mangnesium
· Concentrated for
greater economy, dilutable for different applications
Directions for Use
Dilute
with cold water only. Dilution rates may vary, general guidelines are:
-
Heavy
scale – dilute 1:1
-
Medium
scale / rust deposits – dilute 1:4
-
Light
rust stains / oil deposits – dilute 1:8
Apply with mop, cloth or acid proof sprayer and allow reaction on
surface for 1-2 minutes. Scrub briskly with nylon pad or stiff brush, then
flush well with water. Cleaned surface should be maintained regularly with an
alkaline detergent such as EASY CLEAN or ACTION 130.
NOTE: Use ACTION
100 S for one time use on severe build-up, and not as a regular cleaning
solution. It will etch marble, terrazzo and certain other surfaces. If unsure
about suitability of product, test on an inconspicuous area first.
Precautions
This product is acidic. Avoid ingestion, inhalation, eye and skin
contact. Wear rubber gloves, protective clothing and provide adequate
ventilation when handling. Flush or dilute with cold water if contacted in any
way, and seek medical help if ingested, inhaled or contacted with eye.
ADHYA GRAHA KENCANA
Komplek Multiguna Blok D6 ● Jalan Raya Serpong KM. 7 ● Tangerang 15325
sales@adhyagrahakencana.com ● www.adhyagrahakencana.com
Jabodetabek ● Bandung ● Bali ● Surabaya
Post a Comment